Sub Bass Enclosure

1x 18″ Sub Bass Driver
Class D Amplifier Module

The BB03.5A professional self powered sub bass loudspeaker system provides strong clean bass response with great sonic impact, while retaining warmth and definition well into the upper bass registers. The loudspeaker system employs an efficient, lightweight neodymium 18″ transducer in an optimally tuned and ported cabinet with a low frequency extension to 35Hz.

The BB03.5A is powered by a sophisticated Class D Amplifier Module complete with a fully integrated Switch Mode Power Supply and onboard Digital Signal Processing. BvNET hardware and Podware software provides complete control and monitoring of the BB03.5A´s amplifiers and internal DSP system and facilitates networking in multi-cabinet systems. Acoustic Technologies manufactures a wide range of loudspeaker systems which incorporate BvNET / Podware, allowing a fully networked system to be controlled and monitored from a single convenient location. For even greater capability Podware can be used as a plug-in with AFMG SysTune audio analysis software.

The BB03.5A is constructed from the highest quality 18mm & 24mm Finnish Birch Ply coated with Acoustic Technologies proprietary elastomer AcoustiCoate protective finish. A powder coated steel grille and pole mount adapter complete a robust, durable and versatile touring cabinet.

The Acoustic Technologies BB03.5A´s compact cabinet dimensions, high power handling and light weight make it ideally suited to all manner of professional audio applications including arena scale Touring Concert Systems, Dance Clubs, Cinemas and Houses of Worship.

Specifications

Transducer Complement 1x 18″ Neodymium Sub Bass Transducer
Frequency Response 35 Hz – 200 Hz ± 3 dB
Maximum SPL (Calculated) 129 dB @ 1 metre
Sensitivity 95 dB @ 1 Watt, 1 metre
Input Impedence 11 kOhms Balanced
Amplifier Module Output Power 2500 Watts RMS
Amplifier Module Type Class D with on-board DSP and
Switch Mode Power Supply
Connectors 1x Female XLR – Signal Input
1x Male XLR – Signal Link
2x RJ45 BVNET Input & Link
1x Powercon – 240Volt AC Mains Inlet
Physical Size Height 643mm (inc Feet), Width 560mm,
Depth 640mm
Net Weight 56 Kgs / 123 Lbs
Hardware 4x Handgrip
4x Recessed Locating Points
Pole Mount Fitting
Cabinet Finish AcoustiCoate Black Elastomer Finish.
Grille Finish Black Powder Coat Paint Finish

The BB03.5A enclosure is constructed of high quality 18mm and 24mm Finnish Birch Ply.
The transducer is protected by a rugged expanded steel grille. Acoustically transparent PVC foam is bonded to the mesh, providing a durable, visually appealing finish.

Sensitivity, Maximum Power and SPL measurements are conducted in accordance with the AES 24 Hour Pink Noise Standard. Acoustic Technologies reserve the right to alter or amend the BB3.5, without prior warning in the interests of product improvement.