Self Powered Composite Line Array

CLA600A: 4x 8″ Low-Mid Driver + 2x 3″ ISOPHASIC HF Array
Dual Channel Class D Amplifier Module

CLA LF3000: 1x 18″ Sub Bass Driver
Single Channel Class D Amplifier Module

The CLA600A Composite Line Array and the CLA LF3000A Sub Bass Enclosure combine to create the self powered BLACKBIRD CLA Sound Reinforcement System. The BLACKBIRD CLA System is the ideal solution for compact touring or in-house systems offering highly advanced line array technology in a compact and easy to use format.

The CLA600A is a 2 way composite line array system utilizing well established line array principals to achieve exceptional frequency response and pattern control. The Bass/Mid Section features 4x 8″, Neodymium Loudspeakers. The critical High Frequencies are reproduced by a dual element ISOPHASIC HF Aperture.
The CLA600A’s dispersion pattern is 150° Horizontal by 20° Vertical providing maximum audience coverage with unparalleled intelligibility. When 2x CLA600A’s are stacked, the vertical dispersion is reduced to 10°. Frequency response is flat 65Hz to 18kHz.

The CLA LF3000A Sub Bass System employs a high power handling 18” transducer to provide a frequency response from 32Hz to 200Hz which is tailored to perfectly compliment the CLA600A.

The CLA600A and CLA LF3000A are powered by sophisticated Class D Amplifier Modules which feature fully integrated Switch Mode Power Supplies and onboard Digital Signal Processing. Output power is 1,250 Watts Program per channel for dual channel mode and 2,500 Watts Program for single channel mode. The Digital Signal Processing in each amplifier module is configured with Acoustic Technologies Factory Recommended Settings which guarantees optimal system performance, output power and long term reliability

BvNET hardware and Podware software facilitates system wide networking capabilities providing complete control and monitoring of the DSP and amplifiers.

A standard self powered BLACKBIRD CLA Systems uses 2x CLA600A Line Array Cabinets and 2x CLA LF3000A Sub Bass Cabinets per stack. Enhanced low frequency reinforcement can be readily achieved with an additional 2x CLA LF3000A Sub Bass Cabinets per stack.

The cabinets are supplied with handgrips, cabinet locating feet and safety attachment points. Castors are fitted as standard for the CLA LF3000A and are an option for the CLA600A. Acoustic Technologies Blackbird CLA Series Cabinets are finished in black AcoustiCoate polymer finish with black powder coated grilles.

CLA600A SPECIFICATIONS

Acoustic Performance
Frequency Response 50Hz – 20kHz ± 3dB
Sensitivity 102dB @ 1 Watt, 1 metre
Maximum SPL (Calculated) 133dB @ 1 metre
High Frequency Dispersion 150° (H) x 20° (V)
System Components
Transducer Compliment 4x 8″ Bass-Mid Transducer
2x 3″ H.F. Transducer on ISOPHASIC Aperture
Amplifier Specifications
Input Impedance 10k Balanced
Amplifier Module Output Power 1250 + 1250 Watts RMS
Amplifier Module Type Dual Channel Class D with on-board DSP
Switch Mode Power Supply
Amplifier Protection Over Current
Over Temperature
DC on Outputs
Indicator LEDs Power On
Signal Present
Limit Active
Connectors Signal Input & Signal Link XLR Connectors
BvNET Input & BvNET Link RJ45 Connectors
PowerCon® AC Mains Inlet
Switches Mains Switch & Circuit Breaker
High Pass 65Hz / 80Hz Switch
Factory / User Preset Switch
Enclosure Specifications
Physical Size Height 452mm, Width 560mm
Depth 484mm, 614mm Including Castors
Weight 40Kgs (43Kgs inc Castors)
Enclosure Finish AcoustiCoate Black Elastomer Finish
Grille Finish Black Powder Coat Paint Finish
Hardware 2x Handgrips
Cabinet Flying Hardware
Cabinet Locating and Safety Attach Points for safe cabinet ground stacking

CLA LF3000A SPECIFICATIONS

Acoustic Performance
Frequency Response 32Hz – 200Hz ± 3dB
Sensitivity 98dB @ 1 Watt, 1 metre
Maximum SPL (Calculated) 132dB @ 1 metre
System Components
Transducer Compliment 1x 18″ Sub Bass Transducer
Amplifier Specifications
Input Impedance 10k Balanced
Amplifier Module Output Power 2500 Watts RMS
Amplifier Module Type Dual Channel Class D with on-board DSP
Switch Mode Power Supply
Amplifier Protection Over Current
Over Temperature
DC on Outputs
Indicator LEDs Power On
Signal Present
Limit Active
Connectors Signal Input & Signal Link XLR Connectors
BvNET Input & BvNET Link RJ45 Connectors
PowerCon® AC Mains Inlet
Switches Mains Switch & Circuit Breaker
High Pass 30Hz / 40Hz Switch
Factory / User Preset Switch
Enclosure Specifications
Physical Size Height 626mm, Width 560mm
Depth 640mm, 770mm Including Castors
Weight 56 Kgs
Enclosure Finish AcoustiCoate Black Elastomer Finish
Grille Finish Black Powder Coat Paint Finish
Hardware 4x Handgrips
4x Castors
Cabinet Locating and Safety Attach Points for safe cabinet ground stacking

The CLA600A and CLA LF3000A enclosures are constructed of high quality Birch Ply. The transducers are protected by a rugged steel grille. Acoustically transparent PVC foam is bonded to the mesh, providing a durable, visually appealing finish.

Sensitivity, Power Handling and Frequency Response measurements are specified using the Factory Recommended Loudspeaker Management System Settings.

Sensitivity, Maximum Power and SPL measurements are conducted in accordance with the AES 24 Hour Pink Noise Standard. Acoustic Technologies reserve the right to alter or amend CLA600A and the CLA LF3000A, without prior warning in the interests of product improvement.

Send us mail