Blackbird BB22

Self Powered Full Range Point Source Loudspeaker System

2x 10″ Bass Transducer + M.F. Compression Driver + H.F. Compression Driver

The Blackbird BB22 is a compact, four way, self-powered, very high SPL, low distortion point source speaker system utilising coaxial component integration.

The amplifier is controlled by the PowerSoft Loto DSP System. The Loto DSP is also available in a Dante version.

The BB22’s compact size and weight are ideal for many installation or touring applications. The flexibility of hardware includes 12 rigging points to allow all configurations of installation, a dual angle pole mount for use on speaker stands and two rear handles for ease of lifting.

Adding to its versatility are the wide range of custom decor matched colours available for the grille and the cabinet.

The BB22 is ideally suited to many installed or portable applications such as corporate audio/video presentations, live music production, worship production, theme and amusement parks and theatre performances.

Acoustic Performance
Frequency Response50Hz – 20kHz ± 3dB
Maximum SPL (Calculated)135.0dB @ 1 metre
High Frequency Dispersion90° (H) x 60° (V)  or  60° (H) x 40° (V)
The MF/HF flare is rotatable allowing either horizontal or vertical cabinet orientation.
System Components
Transducer Complement2x 10″,  3″ Voice Coil Neodymium LF Transducer.
1x Coaxial Ring Radiator, 4″ Voice Coil MF Neodymium Compression Driver.
1x Coaxia 1.4″ Exit, 2.5″ Voice Coil HF Neodymium Compression Driver.
Amplifier Specifications
Input Impedance10k Ohms Balanced
Amplifier Module Output Power4,000 Watts Continuous
7,000 Watts Peak Program
Amplifier Module Type4x Channel Powersoft Class D Amplifier with
Loto DSP Platform.
Dante Digital I/O is an available option.
Switch Mode Power Supply.
Amplifier ProtectionOver Current / Short Circuit
Over Temperature
DC or High Frequency on Outputs
Indicator LEDs & DisplaySystem Status
Remote Status
Preset Selected 1 – 4
1.8″ TFT RGB Display
Connectors2x Anaolg Input XLRs with Signal Link Connectors
2x Switched Ethernet Ports
PowerCon® AC Mains Inlet
Enclosure Specifications
Physical SizeHeight 630mm, Depth 300mm, Width 370mm
Enclosure FinishAcoustiCoate Black Elastomer Finish
Custom decor matched colours are available
Grille FinishBlack Powder Coat Paint Finish
Mounting Options and Hardware12x Rigging Points to allow all configurations of installation.
2x Rear Handles for ease of lifting.
Dual angle Pole Mount for use on speaker stands
A range of alternative portable and installation hardware available

The BB22 enclosure is constructed of high quality void free 12mm and 18mm Birch ply.  The transducers are protected by a perforated steel mesh, lined with acoustically transparent material, providing a durable visually appealing finish.

Sensitivity, Maximum Power and SPL measurements are conducted in accordance with the AES 24 Hour Pink Noise Standard.
Acoustic Technologies reserve the right to alter or amend the BB22 without prior warning in the interests of product improvement.

Enquiry Form